Showing posts with label manual. Show all posts
Showing posts with label manual. Show all posts

Palmgren 61051 AP05 1/2-Ton Manual Arbor Press

Posted by Jeep On 5:55 AM 0 comments

Buy Cheap Palmgren 61051 AP05 1/2-Ton Manual Arbor Press


Buy Low Price From Here Now

Arbor Presses Machine Type: Mechanical Pressure: 1/2
Readmore

Technical Details

- Study cast iron construction
- Removable machined steel anvil provides accurate work support in four slot positions
- Rugged steel ram is driven by machined pinion.
- Punches or tools may be added to the end of the ram with the aid of a magnetic insert
- Base drilled for mounting on bench or pedestal.
See more technical details
Customer Buzz
 "Good product ... good value" 2009-02-05
By Hawk-eye (Oak Ridge, NC)
Well made, flexible to use. If you need a small press .. this is definitely the one you want. Well made, functional and dang what a value. Price them out there ... but you'll be back. Palmgren makes a wonderfully made product. No complaints at all.



If the larger presses they offer are as well made as this one ... I might just have to pick one up later. Comparing what I got from Palmgren to the ones available locally ... no comparison. This is much better and comes with the three tips. Reversing the ram to use the tips couldn't be easier. Do I sound please? You bet I am. Great press and I spent at least $30 less than I would have for one that's not even on par with this one!

Customer Buzz
 "DON'T HESITATE, BUT IT NOW" 2008-10-19
By E. Moreno Jr. (Millbrae, CA United States)
OK Folks,



if you need an arbor press, and if it's a plus because it was made in the good ole USA...then this is the one for you.



The price is excellent, and the quality is great.



I purchased it for something "other" than it's intended purpose, and was NOT disappointed.



If you need an arbor press, then look no farther.



In Chrst: Raymond

Customer Buzz
 "as a riveter" 2008-06-11
By Maggie (MO)
The bonus flare tips are exactly what I needed for riveting. Easy to turn the shank around to use the magnetic tips. Good price. Does what I needed.

Customer Buzz
 "Quality & Precision" 2008-05-27
By R. Begin (Coeur d Alene, ID)
I purchased the Palmgren 1/2-Ton Arbor Press for use setting rivets. As a mechanical designer, I appreciate nicely done machinery. Precise, accurate, and the incusion of several insertable shaped tips held in place using an embedded magnet is a nice bonus. Good item!

Customer Buzz
 "Perfect for My Workshop" 2007-05-21
By Bill B. (Leesburg, FL)
The Palmgren 1/2 ton arbor press is the perfect size for small jobs. The quality of fit and finish is more than I expected, and the 3 interchangable anvils are a extra plus. Great value!!!


Images Product

Buy Palmgren 61051 AP05 1/2-Ton Manual Arbor Press Now

Palmgren 61101 AP10 1-Ton Manual Arbor Press

Posted by Jeep On 4:48 AM 0 comments

Buy Cheap Palmgren 61101 AP10 1-Ton Manual Arbor Press


Buy Low Price From Here Now

Arbor Presses Machine Type: Mechanical Pressure: 1
Readmore

Technical Details

- 1-ton manual arbor press delivers heavy force needed for riveting, squeezing, punching, bending, and other pressing applications
- Removable machined steel anvil provides accurate work support in 4 slot positions
- Sturdy cast-iron construction
- Equipped with a hand wheel to perform light and quick press work
- Base drilled for mounting on bench or pedestal.
See more technical details
Customer Buzz
 "Arived Broken, Hidden defect from factory! Cheep built for the price" 2010-01-03
By James Dingman (Wisconsin, USA)
The first thing that I noticed was that the Palmgreen press was very lightweight compared to my other 1 ton arbor presses. Not sure if this is good or bad, depends on the strength of the iron used on these units. We will see how it stands up in the long run.



The first press that I received was cracked in the center of the base both sides of the base. This was a factory defective casting that was "hidden" by paint and passed on to the unsuspecting consumer, me! I did not see the cracks until I mounted the press and big chunks of paint flaked of both sides where the base flexed. Good think I noticed it before I put the press into service or I might have got a facefull of press as it let loose under pressure! Currently waiting for the replacement.



AS to the quality of the unit I was not particularly impressed. I have a couple of other Taiwan and China presses in my shop and overall they are better quality than this Palmgreen and cost almost half as much. My main concern, other than the cracked base, is the lack of gibes for the post. On both of my Oriental units the center drive post rides on brass plates that are loosened and tightened by the set screws in the front plate and the side of the unit. On the Palmgreen the column rides directly on the ends of the set screws which is not a good thing as all the pressure is concentrated on the face of the 1/4 inch screws and will result in rapid wear and grooving on the face of the post! Another quality issue I have with this unit is that the side of the post was never finished after the teeth were cut and there were rough burrs all up and down the post which dragged on the casting. I expect this kind of thing from cheep Taiwan machine work but not a highly touted American Made unit.

Overall, not impressed!

Customer Buzz
 "Nice little press!" 2009-06-08
By Mr. Fixit (Dallas TX)
This arbor press is just what I needed. It's small, it fits on top of a workbench nicely, and it is very well-made.

Customer Buzz
 "An excellent product" 2009-03-16
By J. Galloway (TX USA)
This arbor press has excellent features and is a quality, built-in-the-USA unit. I especially like the hole in the ram so that tool tips of different shapes can be attached. It uses a magnet to hold them in place. I made my own attachement to use this as a leather stamping press and it works great. I found that if you make your own tool tip that you need to carefully copy the ones provided so that the length of the mounting hole portion does not extend further and come in contact with the magnet. I would recommend this product to anyone.

Customer Buzz
 "Pretty darned good......." 2007-12-27
By John Russo (Chester, New Hampshire United States)
I know, I know, he's going to talk about cast iron again. Sorry folks, it's the only way to go. This little benchtop unit is great for small press jobs...bearings, dowels, roll pins, etc.

Customer Buzz
 "Excellent quality arbor press." 2007-04-02
By George Lamb (West Virginia)
Much, much better than the typical Chinese made generic arbor press. Good fit and finish, includes accessories that most do not. Was very pleasantly surprised at the overall quality and value. Highly recommended.


Images Product

Buy Palmgren 61101 AP10 1-Ton Manual Arbor Press Now

Subscribe to: Posts (Atom)