Buy Low Price From Here Now
Perfect for the small shop, this tough little guy won't get in your way when things get cramped. Put it away on the shelf when finished. Very cute unit! Specifications: Motor: 1/3 H.P., TEFC motor, 110V Overall height: 23" Spindle travel: 2" Number of speeds: 5 (620, 1100, 1720, 2340, 3100 RPM) Drill chuck: 1/64" - 1/2" (1-13mm) Swing: 8" Drilling capacity: 1/2" steel Table: Precision ground cast iron Table swing: 360° Approx. shipping weight: 45 lbs. Table tilts: 90° left and right
Readmore
Technical Details
- Drill chuck: 1-64" - 1/2" (1-13mm)- Drilling capacity: 1/2" steel
- Motor: 1/3 H.P., TEFC motor, 110V
- Number of speeds: 5 (620, 1100, 1720, 2340, 3100 RPM)
- Swing: 8"
See more technical details
By Mr. M. H. Cox (Ebbw Vale, Gwent United Kingdom)
Ordered, paid and delivered within a week. I unpacked, and assembled within 2 1/2 hours. The drill
is silent and meets its specification. Just a few tips. I used 4 1/2 inch bolts for the base. Before bolting the column to the base, clean, and try inserting into the headstock. You will note a column stop about 2 1/4 inches inside the headstock. When you are satisified that the column will easily move inside the headstock, place a piece of insulating tape about 2 1/4 inch from top of column. Now bolt the column to base. Next, the table support, mine was slightly rough between the clamping space. Used a fine file. table support then easily slides on the column. Now slide table support on column, then the headstock, the tape will indicate when headstock is fitted correctly.
I fitted a 4" vice to the table support, with one side bolted to the table, using 1 1/2 bolts. It works for me. Support lock handle, mine is fitted to the left hand side!!!!!!
I tapped the chuck using a mallet. The drilling return spring is OK. I did not change the drill depth stops.
Finally, beware, the overall height is 22", but the pulley safety cover requires a further 5 inches.
Easily a five star plus for the product, delivery and cost.
By Simon J. Storey (Los Angles, CA United States)
I am returning this drill press to Grizzy for a refund. I was told by their
customer service today "you get what you pay for". I'd rather have a lousy drill press than a lousy reputation. At least I can return the drill press.
Grizzly = never again!
By Robert Chave
This tool is adequate for those tasks in which a hand drill does not give sufficient positional control and you wish that you had a drill press. Now for very little money you can keep one on the back bench.
Images Product
Buy Grizzly G7942 5 Speed Baby Drill Press Now
Benchtop Thickness Planer
Love your site. My thanks for doing such a good job. I will come back to read more and inform my coworkers about your site.